Announcement Announcement Module
Collapse
No announcement yet.
Unsharp prints on 3011 Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Unsharp prints on 3011

    Recently I've noticed that my my prints don't looks as sharp as they used to. When I use a loupe, I can see that the magenta is offset a bit. What do I need to do to fix that?
    Thanks.

  • #2
    may be the Exposure position is out. if u have old working back up load it or go to service mode and do the exposure position adjustment. and set the magenta position by text print.

    Comment


    • #3
      I don't know how to go into the service mode.

      Comment


      • #4
        - To enter Service Mode: on main display of QSS software, press <F > choose Menu: press <F> + <-1>, then input password: 2310, <YES>.
        - Go to Exposure Position Adjustment: F > Menu > Extension > Maintenance > Various Adjustment > Printer Machenical Adjustment > Exposure Position Adjustment: press <F>, choose: Test print (Paper Magazine A), after print comes out, choose match values that instructed on the screen and input them to.
        Last edited by haphandinh; 12-11-2012, 07:17 PM.

        Comment


        • #5
          Whoo hoo! That did it! Thanks so much for your help, again.

          Comment

          Working...
          X