Announcement Announcement Module
Collapse
No announcement yet.
Noritsu 3101 turn off Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Noritsu 3101 turn off

    Hello our 3101 operator´s claned the machine with wet dry vac and he said that the machine as turn off.
    Now the machine isn´t tur on and I can see the 220v anth PCB But I don Know where Is the Pc to all Voltage.
    come boda can help me please? thanks

  • #2
    Is the green light on the sorter lit up?
    If it is, press it for approx 5 seconds and the machine should start up.

    Comment


    • #3
      I press it and the machine don´t work what else can I do??

      Comment


      • #4
        Español:
        1.-Primero revisa los "breakers" de tu negocio, asegúrate que TODOS estén encendidos.
        2.-En segundo lugar revisa que el interruptor principal de la máquina esté encendido. Este está ubicado debajo del "Sorter" en el extremo derecho de la máquina.
        3.-En la parte de atrás del mueble que contiene a la computadora ( SI-2600) hay un interruptor, revisa que esté encendido.
        Si estos interruptores ( máquina y computadora) están en ON, la lamparita verde que está en el "sorter" debería estar encendida. Al presionarla por unos 5 segundos, la máquina debería encenderse, a continuación enciende la computadora pulsando el interruptor ubicado al frente de la misma con la borra de un lápiz.
        Espero te haya ayudado....

        English:

        1.-First check the "breakers" of your business, make sure everything is switched on.
        2.-Second check that the power switch of the machine is on. This is located under the "Sorter" at the right end of the machine.
        3.-In the back of the unit that contains the computer (SI-2600) is a switch, check that it is on.
        If these switches (machine and computer) are ON, the green lamp is in the "sorter" should be on. When pressed for about 5 seconds, the machine should turn on, then turn on the computer by pressing the switch on the front of it with a pencil erase.
        I hope I helped you ....
        Last edited by Immagini; 03-07-2013, 08:08 PM.

        Comment

        Working...
        X