Announcement Announcement Module
Collapse
No announcement yet.
MLVA Load voltage. Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • MLVA Load voltage.

    Dear Exparts,
    I have in problem my Noritsu-2901.Can not creat MLVA "Load Voltage".I have hardly try to creat Load voltage this way--
    First MLVA Data initialize from Service mood,then Try to inner calibration & Load voltage.But When I try to creat update Load voltage,it display starting for 10 second & then sow "compleated"Bias volt=RED-0,GREEN-0,BLUE-0.I can not compleat it.What is the solution?


    Note:-This machine can't creat uniformity calibration.

  • #2
    Dear Sir

    We have a 2901 parts for sale The Load Voltage PCB @ 2500 USD if you want please feel free contact us my e mail address is a minilabrepair@gmail.com

    Thanks

    Comment


    • #3
      Dear Techpho,
      Have encountered the same problem with a 2701 and that problem came from a faulty drive voltage pcb. So if your machine has that board then you might try changing that.(and am sure you can get it cheaper!)

      Comment


      • #4
        Thank you mp1600,
        I'm trying this way.thanks for your help.

        Comment


        • #5
          Dear tech



          Check the following

          Goto MENU-EXT-MAINTANANCE-INPUT CHECK-PRINTER-EXPOSURE SECTION

          There select F-Key and press YES Key

          The display will strt measuring the Light from MLVA Check wht readings are shown

          If it dont display any values or abnormal values than there is possibility of problem with Pre Amp PCB measuring the Light intensity

          Please me know wht value is displayed

          NORITSUENGG

          Comment

          Working...
          X