Announcement Announcement Module
Collapse
No announcement yet.
QSS-3704F Processing solution temperature not rising. Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • QSS-3704F Processing solution temperature not rising.

    Hello! my machine stopped heating. temperature P1, P2 and PS does not rise. any hints?

  • #2
    Check the NFB2 circuit breaker has not tripped.
    For the over temperature issue, check the chemical filters are not blocked and that the chemistry is circulating properly.

    Comment


    • #3
      where is he located?

      Comment


      • #4
        Behind the back panel below the dryer. Where the power cable comes into the machine.

        Comment


        • #5

          this?

          Comment


          • #6
            Yes

            Comment


            • #7

              both switch from 0 to 1?

              Comment


              • #8
                Yes, all 3 breaker switches need be on 1 (on).
                Last edited by Noritsu Help; 05-28-2018, 05:28 PM.

                Comment


                • #9
                  I switched over and everything works fine! Thank you for your help !

                  Comment


                  • #10
                    Great!
                    Thank you for coming back and telling us the result, it's nice to see a completed post for a change.

                    Comment

                    Working...
                    X