Announcement Announcement Module
Collapse
No announcement yet.
Roller marks on prints from QSS 3300 Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roller marks on prints from QSS 3300

    I have struggled to get rid of these roller marks from QSS-3300 for about 6 months. I've done a few complete chemistry changes and deep cleans, which helps some but never solves the problem. The marks are always this exact same pattern and I haven't really been able to source the problem to one specific rack, etc.
    Any idea which part of the machine is causing this?
    Image: https://www.dropbox.com/s/zxlf11bbbv...marks.jpg?dl=0
    Thanks.

  • #2
    Guess second upper turn rack, but only you can find what exactly cause lines . Open processor cover, remove paper after few racks and see where these lines appear.

    Comment

    Working...
    X