Announcement Announcement Module
Collapse
No announcement yet.
35plus and 32 LaserIssue Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 35plus and 32 LaserIssue

    Dear all
    I need Laser Expect Help.
    Please Find out the attachment. from both 32 and 35plus has same issue
    please check the triangle. i have changed the Aom, Laser Driver And Laser Control but it the same. until i changed Complete Laser Unit. So what might be can cause in the laser? and one more thing black balance triangle is coming out fine.
    Please Advise,
    Best Regard

  • #2
    Have you tried carrying out the initial setup?
    Was any work done on the laser unit prior to this problem?

    Comment


    • #3
      Dear Noritsu Help
      Thanks For Reply.
      yes i have tried initial setup after the data initialize and i haven't work on it. because all gun are Synchronize (1380) properly. so i decide to changed the complete laser unit. now i need to fix the laser unit so i want to know what can cause?
      Thanks

      Comment


      • #4
        If replacing the laser unit solved the problem, then there will be an internal problem inside the laser unit.
        It could be mechanically damaged by bad transportation, a problem with damaged internal optics etc. If it's not something you understand yourself, it would be better to have a laser expert check it over and make the necessary adjustments.

        Comment


        • #5
          Your Green Laser Gun light may broken . It shape of Laser Light may not circle .

          Comment

          Working...
          X