Announcement Announcement Module
No announcement yet.
Laser Diagnostic software Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Laser Diagnostic software

    waht is the function Laser Diagnostic software in noritsu 32xx, When and how deal with it ?

  • #2
    Laser diagnostic software is to check how good is your laser section. It will not show what is wrong - laser head, AOM crystal, AOM driver, optical alignment and etc.
    To use it quit Noritsu software ( close down check, F , quit the application. Then remove Noritsu icon from Programs, Startup. After that run laser test software. Agree update driver, restart, and upgrade software.
    After all that have wait until laser will be pre-heated. Then can run test. Step by step decrease percents until have error. This way you can find how good your laser section.
    If on some color ( R, G, B ) you have errors even on 100% then something bad in that channel. Can be laser head, laser driver, AOM crystal, AOM driver, optical alignment, connectors and many other.
    More details read on laser test software manual.


    • jmabilal
      jmabilal commented
      Editing a comment
      Thank you for ur attention

  • #3
    Laser diagnostics has the wrong name.
    It does not diagnose a laser module.
    It is better to invite a service engineer and ask him to measure the voltage on a laser driver of the certain channel, if you want to know the condition of the certain laser module.But this operation is for trained and qualified personnel.
    It is easy to have the laser burnt during the measurements.