Announcement Announcement Module
Collapse
No announcement yet.
35 AFC II carrier Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 35 AFC II carrier

    As we were setting up this morning, we changed our 120 AFC carrier back to the 35 AFC, and so far, we can't get the "remove film from carrier" error to go away. There is no film in the carrier, we have cleaned the sensors, have replaced it with the 120 carrier, shut down and restarted, but it still comes back, and the red warning light on the scanner flashes on the 35, but not 120, nor slide carrier. Is there something I am missing?

  • #2
    Did this stops printing from printer or just the blanking red light nerves you ?

    Comment


    • #3
      Malcolm, go to service mode and input check. There look which carrier sensor ( or sensors ) dark. Then go maintenance, various adjustments, film carrier adjustments. There set maximal rates ( 255 ) for these sensors ( sensitivity and intensity ) .
      If even then you have error - then need repair film carrier. I can do it, if needed.

      Comment

      Working...
      X