Announcement Announcement Module
Collapse
No announcement yet.
3101 Error: 6105-001 : B Laser light source status errors. Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3101 Error: 6105-001 : B Laser light source status errors.

    Greetings to all forum members.

    Fault description :
    - Power on
    - Win2000 loaded
    - QSS program versión G002 loaded
    - To initialize the program ( takes a little longer than normal) ,
    throws the error 6105-001 : B Laser light source status errors.
    - We canceled the error
    - Post: Laser temperatures are being adjusted. Remaining time approx: 5 min.
    - We wait 5 minutes.
    - Post: Laser temperatures are being adjusted. Remaining time approx: 30 min .
    - We wait 30 minutes.
    - Error/Attention 1049-002 : Execute Auto Tuning .
    - We do not have the option of doing the Autotuning ( see picture attached ), even in "Service Mode"

    In " System version check " we can see that Laser version is: 0106 Y2 A. That is, Laser is type A. Laser Driver card is J390656 -03 ( see attached image )

    The first time we did the Daily Setup , got attached picture 01 .
    Thereafter the Daily Setup gives Attached picture 02 .
    We have no other error message.

    Questions :
    Why we don´t have the option of Autotuning ?
    Surely the Blue laser gun is damaged but could also damaged the Blue Laser driver ?
    Is there a procedure that can carry out a good technician to change the Blue Laser Gun in Box Laser ?

    In advance, thanks for your help.
    Last edited by Immagini; 10-26-2013, 11:42 PM.

  • #2
    Hello,
    We sent to you our recommendation but have no response from you.
    Do you need help or all problems have been solved?

    Comment

    Working...
    X