Announcement Announcement Module
Collapse
No announcement yet.
R1 Super DS-1000 problem with film scanner ERR-R240-0 please Help me!!!! Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • R1 Super DS-1000 problem with film scanner ERR-R240-0 please Help me!!!!

    Hi Im from Bulgaria my name is Niki i work in our Photo Studio Konica i have problem with Film Scanner on R1 super machine DS-1000 is film scanner the error is this

    ERR-R240-0
    Abnormality of shutter operation was generated.
    When error continues,it ends application and drops the breaker please restart

    Please tell me what is the problem and what can i do to work again.

    If anybody know what is the problem and what can i do to work again.

    Please write me on skype konica_kardjali,

    or niki17.kj,

    or in facebook http://www.facebook.com/konicakardja...ca?ref=tn_tnmn

    or http://www.facebook.com/niki.rangelov.9?ref=tn_tnmn

    or e-mail niki18kj@abv.bg

    Thank you.

  • #2
    What to Do if an Image Capture Unit Error Occurs

    <Symptoms>
    When the film scanner develops trouble, one of the following error messages appears.
    Especially, if the “Code: #######” number in the message is one of those enumerated in the table below, the error is caused by mechanical image capture unit malfunction, so you may have to decide whether the unit needs replacement or not, depending on the frequency of occurrence.

    ERR-R25-0
    An error occurred on the image
    capture unit.
    Command: ******.
    Code: #######.
    ERR-R22-0
    An error occurred while a scan was
    in progress.
    Command: ******.
    Code: #######.

    ERR-R239-0
    The zoom lens malfunctioned.
    If you can’t recover from the error,
    quit the application, turn off the
    breaker, then restart the machine.

    ERR-R240-0
    The shutter malfunctioned.
    If you can’t recover from the error,
    quit the application, turn off the
    breaker, then restart the machine


    List of error codes likely to require image capture unit replacement
    Sub-code Nature of problem Remark
    21001111H Zoom lens didn’t return to home position (group
    1 time-out). Zoom lens motor,
    sensor, etc.
    21001112H Zoom lens didn’t return to home position (group
    1 failure to detect lens at home position). Zoom lens motor,
    sensor, etc.
    21001121H Zoom lens didn’t return to home position (group
    2 time-out). Zoom lens motor,
    sensor, etc.
    21001122H Zoom lens didn’t return to home position (group
    2 failure to detect lens at home position). Zoom lens motor,
    sensor, etc.
    21001811H Lens didn’t operate (hadn’t returned to home
    position immediately before). Zoom lens motor,
    sensor, etc.
    21001812H Lens didn’t operate (hadn’t returned to home
    position immediately before). Zoom lens motor,
    sensor, etc.
    21001813H Lens didn’t operate (group 1 beyond-limit). Zoom lens motor,
    sensor, etc.
    21001821H Lens didn’t operate (hadn’t returned to home
    position immediately before). Zoom lens motor,
    sensor, etc.
    21001822H Lens didn’t operate (hadn’t returned to home
    position immediately before). Zoom lens motor,
    sensor, etc.
    21001823H Lens didn’t operate (group 2 beyond-limit). Zoom lens motor,
    sensor, etc.
    21001848H Lens didn’t operate (failure to open shutter). Shutter motor, sensor,
    etc.
    21001849H Lens didn’t operate (failure to close shutter). Shutter motor, sensor,
    etc.

    Sub-code Nature of problem Remark
    2100184BH Lens didn’t operate (incorrect shutter
    initialization). Shutter motor, sensor,
    etc.
    21002741H Iris didn’t operate (failure to detect iris at home
    position). Shutter motor, sensor,
    etc.
    21002A48H Shutter didn’t operate (failure to open). Shutter motor, sensor,
    etc.
    21002A49H Shutter didn’t operate (failure to close). Shutter motor, sensor,
    etc.
    21002A4BH Shutter didn’t operate (incorrect shutter
    initialization). Shutter motor, sensor,
    etc.
    210083XXH Lens communication time-out. Zoom lens CPU.

    210084XXH A sum error occurred while communicating
    with lens. Zoom lens CPU.
    21008500H Communication link with lens wasn’t established.
    Zoom lens CPU.

    Conclunding the problem arise from 2 motors on Image Capture unit inside Scanner Unit. If you can find the motors pls replace them otherwise you might replace the whole Image Capture unit

    - N -

    Comment

    Working...
    X