Announcement Announcement Module
Collapse
No announcement yet.
Fmpc Unable To Connect To Ic Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fmpc Unable To Connect To Ic

    Hello everyone. I just finished upgrading my LP-2000 to 7.7x succesfully. I made backups of my printer's configuration, print size table and imported into the FMPC (called it EZPC00). Everything went great. The FMPC communicates flawlessly with the LP-2000.

    I also installed the Data Writing Software client in the FMPC and pointed it to my PIC (in my case, labserver1). However, when I go to my FMPC and set the IC name to 'labserver1', i get the Server/DICII was not found message. Both machines can reach each other by DNS and IP, and have the administrative password (FRONTIER) cached.

    What am I missing? I started looking at the Panda printer configuration and see I might need to make a change there (screenshot attached) but not sure what the FMPC requires.

    Any ideas on how to get this up and running? Pictures on the one drive link below - thanks.

    https://onedrive.liv...hint=folder,JPG

  • #2
    Did you solved FMPC problem?

    Comment

    Working...
    X