Announcement Announcement Module
Collapse
No announcement yet.
Defective paper magazine d-lab.1 ? Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Defective paper magazine d-lab.1 ?

    Hello everybody,
    I submit to you some problems with my paper magazines.
    I have five paper magazines (102G, 102M, 203M, 203M and 102G no back print).

    One leave enter the light. Paper roll is directly impacted.
    One other cause some stranges effects, there are random 'flash lights' on prints.
    With two others, the paper lenght cut is variable (f.o. : when I print 102x152, first print is 152mm, second 150mm, third 150mm, 151mm, 149mm, 151mm, .... ). Print with white margin is not possible anymore.

    I have an older d-lab.1 and I have try these paper magasines in this 'old' machine (with new software install), : problems are the same .... This is not my lab, ce sont les paper magazines.

    Visually, there are no problem with these paper magazines.
    I disassembled, cleaned, ... the problems are still present.

    Have some of you already encountered this kind of problem?
    Is it possible to repair these paper magazines ?
    Where can I bought new (or perfect state) paper magasines ?

    Many thank's (and sorry for my bad english),

    Pierre

    Visually, there is no problem with these paper magazines.
    I disassembled, cleaned, ... problems are still present.

    Have some of you already encountered this kind of problem?
    Is it possible to repair these paper magazines ?
    Where can I bought new (or perfect state) paper magasines ?

    Many thank's (and sorry for my bad english),

    Pierre
Working...
X