Announcement Announcement Module
Collapse
No announcement yet.
Green/Teal Test Print Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Green/Teal Test Print

    Yesterday My prints were all turning out yellowish, so I replaced all the STB and CD, and ran my daily setup and got it back to working condition. This morning when I came in and powered up the machine my test prints all turned out green. The daily setup image with isn't even underneath the green print, and there is now some stair image in darker colors. Any ideas?
    Here is my poor test print which lead me to believe there was some chemical contamination. Here is my daily set up this morning

  • #2
    The most likely problem will be a faulty Green AOM driver.

    Comment


    • #3
      The problem seemed to self resolve after I re-ran the daily set up. However, it has since returned. How would I go about adjusting the green AOM driver?

      Comment


      • #4
        You can't adjust it. Either replace the Green AOM driver, or have your faulty AOM driver repaired.

        Comment

        Working...
        X